FUSO CANTER(FE71PB8SRDG1)
-
FUSO CANTER(FE71PB8SRDG1)
ADDITIONAL INFO
Engine
| Max G.V.W (kg) | 4,500 |
| kerb weight (kg) | 1,830 |
| Wheelbase(W.B.) (mm) | 2,500 |
| Overall lenght(O.A.L.) (mm) | 4,660 |
| Overall width(O.A.W.) (mm) | 1,695 |
| Overall height(O.A.H.) (mm) | 2,005 |
| Tread Front(T.F.) (mm) | 1,390 |
| Tread Rear(T.R.) (mm) | 1,380 |
| Frame width(F.W.) (mm) | 700 |
| Front overhang(F.O.H.) (mm) | 1,000 |
| Rear overhang(R.O.H.) (mm) | 1,065 |
| Max. speed (km/h) | 103 |
| Max. Grandeability(with Max G.V.W.=5000kg) (tan∅%) | 49 |
| Min.turning radius (m) | 5.1 |
| Differential Gear Ratio | 5.714 |
| Model | Mitsubishi FUSO 4D34-2AT5 Turbocharged with intercooler |
| Type | 4-stroke, water-cooled direct injection Diesel Engine |
| Engine Capacity (cc) | 3,908 |
| EURO Emission | EURO 2 |
| Max. output (ps/rpm) | 110/2,900 |
| Max. torque (Nm/rpm) | 275/1600 |
| Clutch | Hydraulic control, single dry plate |
| Transmission | 1st to 5th range: Synchromesh gears Reverse: Constantmesh gears |
| Gear ratio | 5.181-2.865-1.593-1.000-0.739 Rev. 5.181 |
| Tyre Front | 7.50R-15-12PR |
| Tyre Rear | 7.50R-15-12PR |
| Power Steering | With |
| Service | Hydraulic with vacuum servo assistance, dual circuit |
| Parking | Internal expanding type on propeller shaft |
| Auxiliary | Exhaust Brake |
| Axle type/Rating Front | Reverse elliot, "I" Beam Type/1960 kg |
| Axle type/Rating Rear | Full floating type/2630kg |
| Battery Voltage | 12Volt x 2,65Ah at 20 hr.rate(75D26L) |
| Fuel Tank | 70 Litres |
| Suspension Front | Laminated lead springs with shock absorbers and stabilizer |
| Suspension Rear | Laminated lead springs with shock absorbers |
RELATED VEHICLES
