FUSO CANTER FG 4X4
-
FUSO CANTER FG 4X4
ADDITIONAL INFO
Engine
| Max G.V.W (kg) | 5,000 |
| kerb weight (kg) | 2,470 |
| Wheelbase(W.B.) (mm) | 3,460 |
| Overall lenght(O.A.L.) (mm) | 6,085 |
| Overall width(O.A.W.) (mm) | 2,035 |
| Overall height(O.A.H.) (mm) | 2,435 |
| Tread Front(T.F.) (mm) | 1,665 |
| Tread Rear(T.R.) (mm) | 1,560 |
| Frame width(F.W.) (mm) | 750 |
| Front overhang(F.O.H.) (mm) | 1,145 |
| Rear overhang(R.O.H.) (mm) | 1,480 |
| Max. speed (km/h) | 91 |
| Max. Grandeability(with Max G.V.W.=5000kg) (tan∅%) | 60% |
| Min.turning radius (m) | 6.8 |
| Differential Gear Ratio | 6.166 |
| Model | Mitsubishi 4D34-2AT5 Turbocharged with intercooler |
| Type | 4-stroke, water-cooled, common rail, diesel engine |
| Engine Capacity (cc) | 3,908 |
| EURO Emission | EURO 2 |
| Max. output (ps/rpm) | 110/2,900 |
| Max. torque (Nm/rpm) | 275/1600 |
| Clutch | Hydraulic control, single dry plate |
| Transmission | 2nd to 5th range; Synchromesh gears 1st, Rev.; Constantmesh gears |
| Gear ratio | 5.380-3.028-1.700-1.000-0.722 Rev. 5.380 |
| Transfer Type | 2 s[eed, Constant mesh |
| Transfer Ratio | Low:1.987, High:1.090 |
| Tyre Front | 7.50R-16 14PR |
| Tyre Rear | 7.50R-16 14PR |
| Steering | Ball nut type with integral type hydraulic power booster. Telescopic and tilt steering column with steering lock |
| Service | Hydraulic with vacuum servo assistance, dual circuit |
| Parking | Internal expanding type on propeller shaft |
| Auxiliary | Exhaust Brake |
| Axle type/Rating Front | Full floating type/2500kg |
| Axle type/Rating Rear | Full floating type/3600kg |
| Electrical system | 12Volt x 2,68Ah at 20 hr.rate(80D26L) |
| Fuel Tank | 100 Litres |
| Suspension Front | Laminated lead springs with shock absorbers |
| Suspension Rear | Laminated lead springs with shock absorbers |
RELATED VEHICLES
